Changing gear

The automatic transmission shifts to the individual gears automatically when it is in transmission position D. This automatic gearshifting behavior is determined by:
• a shift range restriction, if selected
• the selected drive program
• the position of the accelerator pedal
• the road speed

    See also:

    Vehicle identification plate
    Even if you have calculated the total load carefully, you should still make sure that the gross vehicle weight rating and the gross axle weight rating are not exceeded. Details can be found on ...

    Deactivating/activating the ECO start/stop function
    General information You can deactivate and activate the ECO start/stop function using COMAND. You can also use the programmable button to activate and deactivate the ECO start/stop function i ...

    Using the TIREFIT kit
    You can use the TIREFIT kit to seal small punctures, particularly those in the tire tread. You can use TIREFIT at outside temperatures down to -4 °F (-20 °C). WARNING   TIREFIT is a l ...