Activating/deactivating air-recirculation mode

You can deactivate the flow of fresh air if unpleasant odors are entering the vehicle from outside. The air already inside the vehicle will then be recirculated.

The operation of air-recirculation mode is the same for all control panels.

WARNING
Fogged windows impair visibility, endangering you and others. If the windows begin to fog on the inside, switching off the air recirculation mode immediately should clear interior window fogging. If interior window fogging persists, make sure the air conditioning is activated, or press the
button. button.

2 in the ignition lock. Turn the SmartKey to position 2 in the ignition lock.
button. To activate: press the The indicator lamp in the  button button.
The indicator lamp in the lights up. button lights up.

levels or at In the event of high pollution levels or at high outside temperatures, airrecirculation mode is automatically activated. When air-recirculation mode is activated automatically, the indicator lamp in the Outside air is added after about 30 button is not lit.
Outside air is added after about 30 minutes.

button. To switch off: press the The indicator lamp in the  button button.
The indicator lamp in the goes button goes out.

deactivates automatically: Air-recirculation mode deactivates automatically:
• after approximately five minutes if outside temperatures are less than about 41 °F (5 °C)
• after approximately five minutes if cooling with air dehumidification is deactivated
• after approximately 30 minutes if outside temperatures are over about 41 °F (5 °C)

    See also:

    Problems with your vehicle
    If you should experience a problem with your vehicle, particularly one that you believe may affect its safe operation, we urge you to contact an authorized Mercedes-Benz Center immediately to h ...

    Transmission positions
    Park position Do not shift the transmission into position P unless the vehicle is stationary. The parking lock should not be used as a brake when parking. In addition to engaging the pa ...

    Resetting values
    You can reset the values of the following functions:  - Trip odometer  - Trip computer "From start"  - Trip computer "From reset" •► Press the butt ...