Setting the exterior mirrors

This function is only available in vehicles for Canada.

If the battery has been disconnected or completely discharged, the exterior mirrors must be reset. The exterior mirrors will otherwise not fold in when you select the "Fold in mirrors when locking" function in the on-board computer.

in position 1 in the ignition lock. Make sure that the SmartKey is in position 1 in the ignition lock.
Folding the exterior mirrors in or out automatically Briefly press button 1.

    See also:

    Adding engine oil
    WARNING If engine oil comes into contact with hot engine parts, it may ignite and you could burn yourself. Do not spill any engine oil on hot engine parts. Environmental note When adding ...

    Tires
    WARNING Do not drive with a flat tire. A flat tire affects the ability to steer or brake the vehicle. You may lose control of the vehicle. Continued driving with a flat tire will cause excess ...

    Windshield washer system and headlamp cleaning system
    The washer fluid reservoir is used for both the windshield washer system and the headlamp cleaning system. Vehicle components and their service products must match. You should, therefore, ...