Changing gear
The automatic transmission shifts to the
individual gears automatically when it is in
transmission position D. This automatic
gearshifting behavior is determined by:
- a possible limitation of the shift range
- the position of the accelerator pedal
- the road speed
See also:
Resetting the side windows
You must reset each side window if a side window can no longer be closed fully.
Close all the doors.
Turn the SmartKey to position 1 or 2 in the ignition lock.
Pull the corresponding switch on ...
ECO start/stop function: significantly reduced consumption in urban traffic
When the car is at a standstill, the engine does not need to be running and
therefore does not need to consume fuel. Recognition of this essentially simple
fact is behind the ECO start/stop functi ...
Removing and installing the cover in the
front wheel arch
You must remove the cover from the front
wheel housing before you can change the
front bulbs.
- To remove: switch off the lights.
- Turn the front wheels inwards.
- Slide up cover 1 and ...