Changing the windshield wiper blades

Removing the wiper blades

- Remove the SmartKey from the ignition lock.

- Fold the wiper arm away from the windshield.

- Firmly press release knob 1 and pull the

- Firmly press release knob 1 and pull the wiper blade upwards from the wiper arm in the direction of the arrow.

Installing the wiper blades

- Position the new wiper blade in the retainer on the wiper arm and slide it into place in the opposite direction to the arrow.
The wiper blade audibly engages.
- Make sure that wiper blade is seated correctly.
- Fold the wiper arm back onto the windshield.

    See also:

    Floormat on the driver's side
    WARNING Whenever you are using a floormat, make sure there is enough clearance and that the floormat is securely fastened. The floormat should always be securely fastened using the fastening ...

    Adjusting the rear seat electrically
    You can only adjust the outer seats in the rear electrically. 1 Seat cushion angle 2 Backrest angle 3 Folding the head restraint up or back 4 Head restraint angle 5 Seat fore-and-aft ...

    Making adjustments in 5 mph (Canada: 10 km/h) increments
    Briefly press the cruise control lever beyond the pressure point, up 1 for a higher speed or down 2 for a lower speed. The last speed stored is increased or reduced. ...