Restarting the tire pressure monitor

WARNING WARNING

It is the driver's responsibility to set the tire pressure to the recommended cold tire pressure. Underinflated tires affect the ability to steer or brake the vehicle. You might lose control over the vehicle.

When you restart the tire pressure monitor, all existing warning messages are deleted and the warning lamps go out. The monitor uses the currently set tire pressures as the reference values for monitoring.

The tire pressure monitor must be restarted when you set the tire pressure to a new value (as a result of changed drive or load characteristics, for example). The tire pressure monitor then monitors the new tire pressure values.

Restart the tire pressure monitor after you have set the tire pressure to the value recommended for the desired driving situation (). Only correct tire pressures on cold tires. Comply with the recommended tire pressures on the Tire and Loading Information placard on the B-pillar on the driver's side. Additional tire pressure values for driving at high speeds or with heavy loads can be found in the tire pressure table on the inside of the fuel filler flap.

  • Make sure that the tire pressure is correct on all four wheels.
  • Make sure that the SmartKey is in position 2 in the ignition lock.
  • Press the button on the steering wheel to or select the Service menu. button on the steering wheel to select the Service menu.
  • Press the button to select Tire Pressure. or Press the  button. The multifunction button to select Tire Pressure.
  • Press the display shows the current tire pressure of the individual tires or the Tire button. The multifunction display shows the current tire pressure of the individual tires or the Tire pressures will be displayed after driving a few minutes message.
  • Press the Current Pressures as New Reference Values message appears in the multifunction button. The Use Current Pressures as New Reference Values message appears in the multifunction display.

If you wish to confirm the restart:

  • Press the button.

The Tire Press. Monitor Restarted message appears in the multifunction display. After driving for a few minutes, the system checks whether the current tire pressures are within the specified range. The new tire pressures are then accepted as reference values and monitored.

If you wish to cancel the restart:

X Press the button.

  • The tire pressure values stored at the last restart will continue to be monitored.
    See also:

    Door control panel
    1 Opens the door 2 Unlocks/locks the vehicle 3 Adjusts the exterior mirrors 4 Selects the exterior mirror, electrically folds the exterior mirrors in/out 5 Opens/closes the side window ...

    Message memory menu
    The on-board computer saves certain display messages. You can call up the display messages in the message memory menu. The message memory menu is only shown if any display messages have been sto ...

    Roadside Assistance button
      Press and hold Roadside Assistance button 1 for more than two seconds. This initiates a call to the Mercedes-Benz Customer Assistance Center. The indicator lamp in Roadside Assistance but ...