Defrosting the windshield
You can use this function to defrost the windshield or to defrost the inside of the windshield and the side windows.
You should only select the defrosting function until the windshield is clear again.
- Turn the SmartKey to position 2 in the ignition lock.
- To activate: press the ¬ button. The indicator lamp in the ¬ button lights up.
The climate control system switches to the following functions:
- cooling with air dehumidification on
- high airflow
- high temperature
- air distribution to the windshield and front side windows
- air-recirculation mode off
- To switch off: press the button. The indicator lamp in the button goes out. The previously selected settings come into effect again. The cooling with air dehumidification function remains on. Airrecirculation mode remains deactivated.
or
- Press the button. The indicator lamp in the button goes out. Airflow and air distribution are set to automatic mode.
or
X Turn temperature control 1 or 8 clockwise or counter-clockwise ().
or
- Press the or button.
See also:
Cleaning the exhaust tail pipes
Impurities combined with the effects of road
grit and corrosive environmental factors may
cause flash rust to form on the surface. You
can restore the original shine of the exhaust
tail pipe b ...
Active Lane Keeping Assist
Important safety notes
Active Lane Keeping Assist monitors the area
in front of your vehicle by means of a camera
at the top of the windshield. Active Lane
Keeping Assist detects lane markings ...
DISTRONIC displays in themultifunction display
► Press the
button to select the
DISTRONIC menu.
Display when DISTRONIC is deactivated
When DISTRONIC is deactivated, you will see
the following in the multifunction display:
1 Vehicle ...