Removing/attaching the washer fluid reservoir

You must remove the washer fluid reservoir from the engine compartment before you can replace the bulbs in the left-hand headlamp.

  • To detach: turn catch 2 counterclockwise.
  • Swing washer fluid reservoir 1 far enough to the side to allow the bulbs of the headlamp to be replaced.
  • To attach: swing back washer fluid reservoir 1.
  • Turn catch 2 clockwise.
    See also:

    Problems with the SmartKey
    Problem Possible causes/consequences and  Solutions You cannot lock or unlock the vehicle using the SmartKey. The SmartKey battery is discharged or nearly discharged ...

    Vehicle identification p
    Even if you have calculated the total load carefully, you should still make sure that the gross vehicle weight rating and the gross axle weight rating are not exceeded. Details can be found on the ...

    Headlamp cleaning system
    The headlamps are cleaned automatically if the "Wipe with washer fluid" function is operated ten times while the lights are on and the engine is running. ...