Storing settings
With the memory function, you can store up to three different settings, e.g. for three different people.
The following settings are stored as a single memory preset:
- position of the seat, backrest and head restraint
- driver's side: steering wheel position
- driver's side: position of the exterior mirrors on the driver's and front-passenger sides
WARNING
Do not activate the memory function while driving. Activating the memory function while driving could cause the driver to lose control of the vehicle.
- Adjust the seat ().
- On the driver's side, adjust the steering wheel () and the exterior mirrors ().
- Press memory button M and one of the storage position buttons 1, 2 or
3 within three seconds.
The settings are stored in the selected preset position. A tone sounds when the settings have been completed.
See also:
Driving on flooded roads
Do not drive through flooded areas.
Check the depth of any water before driving
through it. Drive slowly through standing
water. Otherwise, water may enter the
vehicle interior or the engine c ...
NECK-PRO head restraints
The NECK-PRO head restraints increase protection to the driver's and front passenger's
head and neck. To this end, the NECK-PRO head restraints on the driver's and front-passenger
seat ...
Driving systems
Display messages
Possible causes/consequences and
Solutions
Based on specific criteria, ATTENTION ASSIST has determined that the
driver is tired or paying less attentio ...