Towing the vehicle with the rear axle raised

Only possible on vehicles without 4MATIC.

When towing your vehicle with the rear axle raised, it is important that you observe the safety instructions.

are towing the vehicle with the rear axle The ignition must be switched off if you are towing the vehicle with the rear axle raised. Intervention by ESP® could otherwise damage the brake system.

Turn the SmartKey to position 0 in the Switch on the hazard warning lamps.

ignition lock and remove the SmartKey Turn the SmartKey to position 0 in the ignition lock and remove the SmartKey from the ignition lock.

SmartKey or the KEYLESS-GO key with you. When leaving the vehicle, take the SmartKey or the KEYLESS-GO key with you.

    See also:

    Changing the set speed
    When DSR is activated, the set speed can be changed to a value between 1 mph and 10 mph (Canada: between 2 km/h and 18 km/h) during the journey. – To increase or decrease the set speed in 1 ...

    Please bear the following in mind
    Resetting service interval display If the qualified specialist workshop, e.g. a Mercedes-Benz Center, carried out the maintenance work, the service interval display will be reset. Further infor ...

    Driving systems
    Display messages The red distance warning lamp lights up while the vehicle is in motion. A warning tone also sounds. Possible causes/consequences and ► Solutions Risk of accident The ...