Points to observe before use

The sockets can be used for accessories, e.g.

lamps or mobile phone chargers with a maximum current draw of 180 W (15 A).

If you use the sockets for long periods when the engine is switched off, the battery may discharge.

ignition lock. Turn the SmartKey to position 1 in the ignition lock.

on-board voltage does not drop too low. If An emergency cut-out ensures that the on-board voltage does not drop too low. If the on-board voltage is too low, the power to the sockets is automatically cut. This ensures that there is sufficient power to start the engine.

    See also:

    Setting the air distribution
    Front control unit: Directs air through the center vents. Directs the airflow through the footwell air vents Directs the airflow through the center and footwell vents. Directs the airflo ...

    Activating/deactivating
    - Turn the SmartKey to position 2 in the ignition lock. - To switch on: press the button. The indicator lamp in the button lights up. Airflow and air distribution are set to automatic mode ...

    Information about driving abroad
    Converting to symmetrical low beam when driving abroad: switch the headlamps to symmetrical low beam in countries in which traffic drives on the opposite side of the road to the country where ...