Introduction
The Settings menu can be used for:
• switching the daytime running lamps on/off • switching Adaptive Highbeam Assist on/off • showing or hiding the additional speedometer • selecting the units for speed and distance • switching the belt adjustment on/off • activating/deactivating the radar sensor system
See also:
High-beam headlamps (halogen
headlamps)
- Switch off the lights.
- Open the hood.
- Turn housing cover 1 counter-clockwise
and pull it out.
- Pull lever 3 upwards and remove bulb
holder 2.
- Take the bulb out of bulb holder 2.
- ...
Activating/deactivating the MONO function
This function is only available in vehicles for Canada.
You can use the MONO function to adopt the temperature and air distribution settings
on the driver's side for the front-passenger side.
...
Towing the vehicle with the rear axle
raised
Only possible on vehicles without
4MATIC.
When towing your vehicle with the rear axle
raised, it is important that you observe the
safety instructions
The ignition must be switched off if you ...