Engaging the electric parking brake automatically
The electric parking brake is automatically
applied if HOLD or DISTRONIC PLUS brakes
the vehicle until it is stationary and at least
one of the following conditions is fulfilled:
• the engine is switched off.
• the driver's door is open and the seat belt is not fastened.
• the hood is released.
• the trunk lid is opened while the automatic transmission is in position R.
• the vehicle is stationary for a lengthy period.
The red
(USA only) or
(Canada
only) indicator lamp in the instrument cluster
lights up.
In addition to the electric parking brake,
P may also be engaged automatically.
See also:
Removing a wheel
Unscrew the uppermost wheel bolt
completely.
Screw alignment bolt 1 into the thread
instead of the wheel bolt.
Unscrew the remaining wheel bolts fully.
Do not place wheel bolts in sand ...
Cross bar
Points to observe before use
The maximum roof load that can be used with
additional accessories decreases by the dead
weight of the crossbars (13.7 lbs/6.2 kg).
Note that installing the crossb ...
Reporting safety defects
If you believe that your vehicle has a defect
which could cause a crash or could cause
injury or death, you should immediately
inform the National Highway Traffic Safety
Administration (NHTSA) ...
