Setting the temperature in the rear compartment using the rear control panel

ignition lock. Turn the SmartKey to position 2 in the ignition lock.

switch 12 or 17 up or down. To increase/reduce: press rocker switch 12 or 17 up or down.

Only change the temperature setting in small increments. Start at 72 °F (22 °C).

    See also:

    Activation conditions
    You can activate the HOLD function if: Rthe vehicle is stationary. Rthe engine is running. Rthe driver's door is closed or if your seat belt is fastened. Rthe electric parking brake is released. ...

    Storing settings
    With the memory function, you can store up to three different settings, e.g. for three different people. The following settings are stored as a single memory preset: • position of the seat, b ...

    GAWR (Gross Axle Weight Rating)
    The GAWR is the maximum permissible axle weight. The actual load on an axle must never exceed the gross axle weight rating. The gross axle weight rating can be found on the vehicle identificat ...