Setting the front-compartment temperature using the front control panel
Turn the SmartKey to position 2 in the
ignition lock.
To increase/reduce: press the
rocker switch up or down.
Only change the temperature setting in small increments. Start at 72 °F (22 °C).
You can also use COMAND to set the
temperature.
See also:
Engaging reverse gear R
Only shift the automatic transmission to
R when the vehicle is stationary.
The ECO start/stop function is not
available when reverse gear is engaged.
For further information on the ECO start/s ...
Correct use of the seat belts
WARNING
USE SEAT BELTS PROPERLY
• Seat belts can only work when used
properly. Never wear seat belts in any other
way than as described in this section, as
that could result in serious injur ...
Removing a wheel
► Unscrew the uppermost wheel bolt
completely.
► Screw alignment bolt 1 into the thread
instead of the wheel bolt.
► Unscrew the remaining wheel bolts fully.
Do not place wh ...
