Automatic interior lighting control
To switch on/off: press the
button.
The OFF indicator lamp shows whether the automatic interior lighting control is deactivated (indicator lamp on) or activated (indicator lamp off).
The interior lighting automatically switches
on if you:
• unlock the vehicle
• open a door
• remove the SmartKey from the ignition lock
The interior light is activated for a short while when the SmartKey is removed from the ignition lock. You can activate this delayed switch-off using COMAND.
See also:
Releasing seat belts
► Press release button 4 and
guide belt tongue 2 back towards belt
sash guide 1.
Make sure that the seat belt is fully rolled
up. Otherwise, the seat belt or belt tongue
will be trapped i ...
Opening/closing automatically from
inside
WARNING
Keep an eye on the area at the rear end of the
vehicle when operating the trunk lid/tailgate
with the remote operating switch on the door.
Monitor the entire closing procedure to
e ...
Making adjustments in 1 mph (Canada:
1 km/h) increments
Briefly press the cruise control lever to the
pressure point, up 1 for a higher speed or
down 2 for a lower speed.
The last speed stored is increased or
reduced. ...
