Setting the EASY-ENTRY/EXIT feature

WARNING
Make sure that nobody can become trapped when you activate the EASY-ENTRY/EXIT feature.
If there is a risk of entrapment by the steering column, move the steering wheel adjustment lever or press the position button of the memory function.
If there is a risk of entrapment by the seat, you can also cancel the adjustment procedure by moving the switch for seat adjustment. The steering column and driver's seat stop moving immediately.
Never leave children unsupervised in the vehicle. They could open the driver's door and thereby unintentionally activate the EASY-ENTRY/EXIT feature and become trapped.

You can make a setting in COMAND so that the steering wheel swings upwards and/or the driver's seat moves backwards before you get into the vehicle. You can make the following settings:
Х OFF: the function is switched off.
Х Steering Column: the steering wheel swings upwards.
Х Steering Column and Seat: the steering wheel swings upwards and the driverТs seat moves backwards.

To set the EASY-ENTRY/EXIT feature: select Vehicle in the

main function bar by To set the EASY-ENTRY/EXIT feature: select Vehicle in the main function bar by sliding the and turning COMAND controller and press  to the COMAND controller and press confirm. to confirm.

The main area is active.

menu by sliding  or turning Select the Easy-Entry/Exit Feature menu by sliding the or turning COMAND controller. the COMAND controller.

The EASY-ENTRY/EXIT feature menu appears. The current setting is indicated by a Select Setting by sliding dot.

or turning Select Setting by sliding or turning or turning The selected setting is indicated by a the COMAND controller.

The selected setting is indicated by a dot. dot.

    See also:

    GVWR (Gross Vehicle Weight Rating)
    The GVWR is the maximum permissible gross weight of a fully loaded vehicle (the weight of the vehicle including all accessories, occupants, fuel, luggage and the drawbar noseweight, if applica ...

    Turn signals
    1 High-beam headlamps 2 Right turn signal 3 High-beam flasher 4 Left turn signal - To indicate briefly: press the combination switch briefly to the pressure point in the direction of arrow 2 ...

    Connecting an external device
    Do not leave external devices in the vehicle as extreme temperatures (e.g. direct sunlight or extremely low outside temperatures) could cause them to malfunction (see the operating instructions ...