Point of interest list
Introduction
The illustration below shows an example of the point of interest list for the Restaurant main category in the vicinity of the current position.
Depending on the point of interest
selected, COMAND uses different
reference points in determining the linear
distance to the destination:
• vicinity of current position: the linear
distance is the distance of the point of
interest from the current vehicle
position.
• vicinity of destination: the linear distance
is the distance from the destination
entered to the point of interest.
Selecting a point of interest
Select a point of interest by turning the COMAND controller and press to confirm.
The complete address of the point of interest selected is shown.
To start route calculation: select Start and press to confirm.
To store an address in the destination memory: select Save and press to confirm. You can now select storage options.
To show the detailed view: select Details and press to confirm.
To make a call: select Call and press to confirm (only available if the point of interest contains a telephone book entry and a telephone is connected to COMAND).
COMAND switches to telephone mode.
To call up the map: select Map and press to confirm.
You can move the map and select the destination.
ZAGAT® Survey service
Entries with the Z icon contain additional ZAGAT information. ZAGAT rates restaurants, for instance, in regard to the quality of the food, furnishing, service, and provides an average pricing level as well as a general description.
Select the entry with the Z icon by turning the COMAND controller and press to confirm.
The ZAGAT evaluations appear.
1 ZAGAT ratings
2 To display details
To show a description: select Details and press to confirm.
ZAGAT example description
See also:
Important safety notes
The EASY-ENTRY/EXIT feature makes getting
in and out of your vehicle easier.
You can activate and deactivate the EASY-ENTRY/
EXIT feature using COMAND.
G WARNING
You must make sure no one can ...
Towing a vehicle with both axles onthe ground
When having your vehicle towed, observe the
important safety notes.
WARNING
The power assistance for the steering and the
brake force booster do not work when the
engine is not runnin ...
Example: step 1 to 3
The following table shows examples on how to calculate total and cargo load
capacities with
varying seating configurations and number and size of occupants. The following
examples use
a load l ...