Switching the button lighting on/off
Press button 2 on the remote control.
Depending on the previous status, the
button lighting is switched on or off.
If you do not use the remote control for
about 15 seconds, the button lighting
switches off automatically.
See also:
Servicing the brakes
If the red brake warning lamp lights up in
the instrument cluster and you hear a
warning tone while the engine is running,
the brake fluid level may be too low.
Observe additional warning ...
Correct driver's seat position
Observe the safety guidelines on seat
adjustment.
► Check whether you have adjusted seat 3
properly.
Electrical seat adjustment
When adjusting the seat, make sure:
• you are as far aw ...
Notes for 4MATIC vehicles
Vehicles with 4MATIC must not be towed with either the front or the rear axle
raised, as doing so will damage the transmission.
If the vehicle has transmission damage or damage to the front or r ...
