Calling up a stored parking position setting
Turn the SmartKey to position 2 in the
ignition lock.
Adjust the exterior mirror on the frontpassenger
side with the corresponding
button.
Engage reverse gear.
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger
side moves back to its original position:
• as soon as you exceed a speed of 9 mph
(15 km/h).
• about ten seconds after you have
disengaged reverse gear
• if you press button 4 for the exterior
mirror on the driver's side
See also:
Setting and storing the parking position
You can position the front-passenger side exterior mirror in such a way that
you can see the rear wheel on that side as soon as you engage reverse gear. You
can store this position.
Make sur ...
Problems with the seat ventilation
The seat ventilation has switched off
prematurely or cannot be switched on. The
vehicle's electrical system voltage is too low
because too many electrical consumers are
switched on.
•► ...
Notes for 4MATIC vehicles
Vehicles with 4MATIC must not be towed
with either the front or the rear axle raised,
as doing so will damage the transmission.
If the vehicle has transmission damage or
damage to the fron ...
