Position of the steering wheel and the driver's seat for driving
If you insert the SmartKey into the ignition lock with the driver's door closed, depending on the setting, the position of the steering wheel and the driver's seat will be changed to the previously set position.
The last position of the steering wheel or seat
is stored if:
• the ignition is switched off or
• the setting is stored with the memory function.
See also:
Setting the B-pillar air vents
1 B-pillar air vent
2 Thumbwheel for B-pillar air vent
To open/close: turn thumbwheel 2 to the
left or right. ...
BAS PLUS (Brake Assist System Plus)
BAS PLUS is only available in vehicles
equipped with DISTRONIC PLUS.
Observe the "Important safety notes"
section
At speeds above approximately
4 mph (7 km/h), BAS PLUS assists you w ...
Activating the rear view camera
Make sure that the SmartKey is in position
2 in the ignition lock.
Engage reverse gear.
The area behind the vehicle is shown in the
COMAND display with guide lines. ...