Resetting the rear sunblind

Door control panel in rear
Turn the SmartKey to position 1 or 2 in the
ignition lock.
Pull switch 1 repeatedly until the rear
roller sunblind is fully closed.
Keep switch 1 pulled for an additional
second.
Make sure that the rear roller sunblind can
be opened fully again.
If this is not the case, repeat the steps
above again.
See also:
Starting procedure with the SmartKey
To start the engine using the
SmartKey
instead of KEYLESS-GO, pull the Start/Stop button out of the ignition lock.
Turn the SmartKey to position 3
in the
ignition lock and release it as
so ...
Tire size designation, load-bearing capacity and speed rating
1 Tire width
2 Nominal aspect ratio in %
3 Tire code
4 Rim diameter
5 Load bearing index
6 Speed rating
Tire data is vehicle-specific
and may
deviate from the data in the example.
Genera ...
Hood
Opening the hood
WARNING
Do not pull the release lever while the vehicle
is in motion. Otherwise, the hood could be
forced open by passing air flow.
This could cause the hood to come loose ...
