Resetting the panorama roof with power tilt/sliding panel or the front roller sunblind
Reset the panorama roof with power tilt/sliding panel or the roller sunblinds if the panorama roof with power tilt/sliding panel or the roller sunblinds do not move smoothly.
Do not open the panorama roof with
power tilt/sliding panel until it has been
reset correctly. The panorama roof with
power tilt/sliding panel can otherwise be
locked in the open position.
Turn the SmartKey to position 1 or 2 in the
ignition lock.
Pull the 
switch repeatedly to the
point
of resistance in the direction of arrow
3 until the panorama roof with
power tilt/sliding panel is fully closed.
Keep the switch pulled for an
additional second.
Pull the switch in the direction
of
arrow 3 repeatedly until the
front roller sunblind is closed.
Keep the switch pulled for an
additional second.
Make sure that the panorama roof with
power tilt/sliding panel and the
front roller sunblind can be fully
opened again.
If this is not the case, repeat the steps
above again.
See also:
Tires
Problem
Possible causes/consequences and •► Solutions
USA only:
The yellow tire pressure
monitor warning lamp
(pressure loss/
malfunction) is lit.
Canada only:
The yell ...
Proper use
WARNING
There are various warning stickers affixed to
your vehicle. Their purpose is to alert you and
others to various dangers. Therefore, do not
remove any warning stickers unless the
s ...
Temperature
WARNING
The temperature grade for this tire is
established for a tire that is properly inflated
and not overloaded. Excessive speed,
underinflation, or excessive loading, either
separately o ...