Cleaning the display
•► Before cleaning the display, make sure that it is switched off and has cooled down.
•► Clean the display surface using a commercially-available microfiber cloth and TFT/LCD display cleaner.
•► Dry the display surface using a dry microfiber cloth.
For cleaning, do not use any of the following:
- alcohol-based thinner or gasoline
- abrasive cleaning agents
- commercially-available household
cleaning agents
These may damage the display surface. Do not put pressure on the display surface when cleaning. This could lead to irreparable damage to the display.
See also:
Upshifting
In manual drive program M, the automatic
transmission does not shift up
automatically even when the engine
limiting speed for the current gear is
reached. When the engine limiting speed is
...
System self-test
After you have switched on the ignition, the
system carries out a self-diagnosis.
WARNING
A malfunction in the system has been
detected if one of the following conditions
occurs:
- the indic ...
Opening/closing automatically from
inside
WARNING
Keep an eye on the area at the rear end of the
vehicle when operating the trunk lid/tailgate
with the remote operating switch on the door.
Monitor the entire closing procedure to
e ...