Cleaning the wiper blades
WARNING
Before cleaning the windshield or wiper
blades, switch off the windshield wipers and
remove the SmartKey from the ignition lock.
On vehicles with KEYLESS-GO, press the Start/Stop button repeatedly until all indicator lamps in the instrument cluster have gone out. The windshield wipers could otherwise move and injure you.
Do not pull the wiper blade. Otherwise, the wiper blade could be damaged.
Do not clean wiper blades too often and do not rub them too hard. Otherwise, the graphite coating could be damaged. This could cause wiper noise.
•► Fold the wiper arms away from the windshield.
•► Carefully clean the wiper blades with a damp cloth.
•► Fold the windshield wipers back again before switching on the ignition.
Hold the wiper arm securely when folding back. The windshield could be damaged if the wiper arm smacks against it suddenly.
See also:
Hiding display messages
You can hide some display messages with a low priority.
Press the or
button on the steering wheel to
hide the display message. The display message is cleared.
Display messages with a hig ...
Service messages
Information on the type of service and service
intervals (see separate Service Booklet).
You can obtain further information from an
authorized Mercedes-Benz Center or at
http://www.mbusa.com (U ...
Using KEYLESS-GO
The KEYLESS-GO key must be outside the
vehicle. All the doors must be closed.
•► Touch recessed sensor surface 1 on the
door handle until the side windows and the
sliding sunroof or the ...