Important safety notes
The HomeLink® garage door opener integrated in the rear-view mirror allows you to operate up to three different door and gate systems.
Certain garage door drives are incompatible with the integrated garage door opener. If you have difficulty programming the integrated garage door opener, contact an authorized Mercedes- Benz Center or call one of the following telephone hotlines:
- USA: Mercedes-Benz Customer
Assistance Center at
1-800-FOR-MERCedes
- Canada: Customer Service at
1-800-387-0100
WARNING
Before programming the integrated remote
control to a garage door opener or gate
operator, make sure people and objects are
out of the way of the device to prevent
potential harm or damage. When
programming a garage door opener, the door
moves up or down. When programming a gate
operator, the gate opens or closes.
Do not use the integrated remote control with any garage door opener that lacks safety stop and reverse features as required by U.S.
federal safety standards (this includes any garage door opener model manufactured before April 1, 1982). A garage door that cannot detect an object - signaling the door to stop and reverse - does not meet current U.S. federal safety standards.
When programming a garage door opener, park vehicle outside the garage.
Do not run the engine while programming the integrated remote control. Inhalation of exhaust gas is hazardous to your health. All exhaust gas contains carbon monoxide (CO), and inhaling it can cause unconsciousness and possible death. All exhaust gas contains carbon monoxide (CO), and inhaling it can cause unconsciousness and possible death.
USA only:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation.
Any unauthorized modification to this device could void the user's authority to operate the equipment.
FCC ID: CB2HMIHL4
Canada only:
This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions:
1. This device may not cause interference, and 2. this device must accept any interference received, including interference that may cause undesired operation of the device.
Any unauthorized modification to this device could void the user's authority to operate the equipment.
IC: 279B-HMIHL4
See also:
Resetting the rear sunblind
Door control panel in rear
Turn the SmartKey to position 1 or 2 in the
ignition lock.
Pull switch 1 repeatedly until the rear
roller sunblind is fully closed.
Keep switch 1 pulled for ...
SRS warning lamps
SRS functions are checked regularly when
you switch on the ignition and when the
engine is running. Therefore, malfunctions
can be detected in good time.
The SRS warning lamp in the
instrumen ...
Manual interior lighting control
To switch the front interior
lighting on/off: press the c button.
To switch the rear interior
lighting on/off: press the u button.
To switch the reading lamps
on/off: press the p button. ...