EASY-PACK load-securing kit (Wagon)
Components and storage
The EASY-PACK load-securing kit allows you to use your cargo compartment for a variety of purposes. The accessory parts are located under the cargo compartment floor.
•► Open the EASY-PACK folding luggagecompartment floor
EASY-PACK load-securing kit accessory parts
1 Telescopic rod
2 Bag containing the brackets and luggage
holder
3 Folding box
Inserting the brackets into the loading rail
•► Insert bracket 1 into the center of loading rail 4.
•► Press release button 2 and push bracket 1 into the desired position in loading rail 4.
•► Let go of release button 2.
•► Press locking button 3.
Bracket 1 is locked in loading rail 4.
•► If necessary, fold cargo tie-down ring 5 upwards.
WARNING
Distribute the load on the cargo tie down rings
evenly.
Otherwise, vehicle occupants could be injured by objects being thrown around if you:
- brake sharply
- change direction suddenly
- are involved in an accident
Please observe the loading guidelines.
Luggage holder
The luggage holder can be used to secure light loads against the side wall of the cargo compartment to prevent them from moving around.
! Only use the luggage holder to secure cargo with a maximum weight of 15.4 lb (7 kg) and with dimensions that the luggage holder can safely and securely contain.
•► To install: insert two brackets 5 into the left or right loading rail.
•► Press release button 1 of the luggage holder and pull the strap out slightly.
•► Insert luggage holder 2 into brackets 5 and, while doing so, press release button 3 and push the luggage holder downwards until it engages.
•► Press release button 1 of the luggage holder and pull the strap out in the direction of the arrow.
•► Place the load between the strap and the cargo compartment side wall.
•► Using one hand, press locking button 1 of the luggage holder.
•► With your other hand, let the strap go slowly until the load is secured.
•► Make sure that locking button 4 on brackets 5 is pressed.
This keeps brackets 5 in place on the loading rail.
•► To remove: press release button 3 on respective bracket 5 and remove luggage holder 2 by pulling upwards and out.
Telescopic rod
The telescopic rod can be used to secure the load against the rear seats to prevent it from moving around.
•► To install: insert one bracket2 into both the left and the right loading rails and slide it to the desired position.
•► Insert telescopic rod 1 into brackets 2 and, while doing so, press release button 4 and push the rod downwards until it engages.
•► Make sure that locking button 3 on brackets 2 is pressed.
This keeps brackets 2 in place on the loading rail.
•► To remove: press release button 4 on respective bracket 2 and remove telescopic rod 1 by pulling it upwards and out.
See also:
Resetting triggered NECK-PRO head
restraints
WARNING
For safety reasons, have the NECK-PRO head
restraints checked at an authorized
Mercedes-Benz Center after a rear-end
collision.
WARNING
When pushing back the NECK-PRO head
r ...
Important safety notes
WARNING
Severe conditions (e.g. strong air pollution) may require replacement of the
filter before
its scheduled replacement interval. A clogged
filter will reduce the air volume to t ...
Permissible trailer loads and drawbarnoseweights
Weight specifications
The Gross Trailer Weight (GTW) is the
combined weight of the trailer together with
the cargo and equipment loaded on the
trailer. Permissible gross weight: 7500 lb
(3402 kg) ...