Folding the rear seat backrest back

•► Move the driver's or front-passenger seat

•► Move the driver's or front-passenger seat forward if necessary.

! Make sure that the seat belt does not become trapped when folding the rear seat backrest back. Otherwise, it could be damaged.

•► Fold seat backrest 1 back until it engages.

WARNING
Make sure that the rear seat backrest is correctly engaged. Otherwise, vehicle occupants could be injured by objects being thrown around if you

 - brake sharply
 - change direction suddenly
 - are involved in an accident

If the rear seat backrest is not engaged, this will be shown in the multifunction display in the instrument cluster.

•► Adjust the head restraints if necessary.
•► Move the driver's or front-passenger seat back if necessary.

    See also:

    System self-test
    After you have switched on the ignition, the system carries out a self-diagnosis. WARNING A malfunction in the system has been detected if one of the following conditions occurs: • the indi ...

    Attaching the roof carrier
    Open covers 1 carefully in the direction of the arrow. Fold covers 1 upwards. Only secure the roof carrier to the anchorage points under covers 1. Observe the manufacturer's installation ...

    Opening and closing
    Overhead control panel 1. To raise 2. To open 3. To close/lower The panorama roof with power tilt/sliding panel can only be operated when the roller sunblind is open. •► Turn th ...