Activating/deactivating Blind Spot Assist

You can use the Blind Spot Asst. function to activate or deactivate Blind Spot Assist or Active Blind Spot Assist.

•► Press to select the DriveAssist menu. on the steering wheel to select the DriveAssist menu.

•► Press Asst.. to select Blind Spot Asst..

•► Press If the function is activated, the monitored.

If the function is activated, the monitored areas are shown in red in the multifunction display.

•► To activate/deactivate: press again again

    See also:

    Driving on flooded roads
    Do not drive through flooded areas. Check the depth of any water before driving through it. Drive slowly through standing water. Otherwise, water may enter the vehicle interior or the engine co ...

    Parking lamps/standing lamps (halogen headlamps)
    •► Switch off the lights. •► Open the hood. •► Turn housing cover 1 counter-clockwise and pull it out. •► Pull out bulb holder 2. •► Take the bulb out of bulb hol ...

    Introduction
    SRS consists of: - the SRS warning lamp - air bags - air bag control unit (with crash sensors) - Emergency Tensioning Devices for the front seat belts and the outer seat belts in the rear - be ...