Problems with Night View Assist Plus
| Problem | Possible causes/consequences and - Solutions |
| The picture quality of Night View Assist Plus has deteriorated. | The windshield wipers are smearing the windshield.
•► Replace the wiper blades. The windshield is smeared after the vehicle has been cleaned in a car wash. •► Clean the windshield. There is windshield chip damage in the camera's field of vision. •► Replace the windshield. The windshield is fogged up on the inside. •► Defrost the windshield. The windshield is iced up. •► De-ice the windshield. There is dirt on the inside of the windshield. •► Clean the inside of the windshield |
See also:
Important safety notes
WARNING
The following factors increase the risk of
accidents:
- Excessive speed, especially in turns
- Wet and slippery road surfaces
- Following another vehicle too closely
The dr ...
Introduction
In the DriveAssist. menu you can:
• show the distance display
• activate/deactivate ESP®
• activate/deactivate PRE-SAFE® Brake
• activate/deactivate ATTENTION ASSIST
• activate/deactivate Blind ...
The windshield wipers are inoperative
The windshield wiper drive is malfunctioning.
Select another wiper speed on
the
combination switch.
Have the windshield wipers checked
at a
qualified specialist workshop. ...
