Activation conditions

You can activate the HOLD function if:

 - the vehicle is stationary.
 - the engine is running.
 - the driver's door is closed or your seat belt is fastened.
 - the parking brake is not applied.
 - the hood is closed.
 - the transmission is in position D, R or N.
 - DISTRONIC PLUS is deactivated.

    See also:

    Adjusting the backrests in the 2nd row of seats
    You can adjust the angle of the backrests in the second row of seats. There are ten detent positions to choose from. - Pull the left or right release lever 2 upwards in the direction of the ...

    Emergency Tensioning Devices, belt force limiters
    The front seat belts and the outer seat belts in the rear are equipped with ETDs and seat belt force limiters. The ETDs tighten the seat belts in an accident, pulling them close against the body. ...

    Storing the current speed or calling up the last stored speed
    WARNING The set speed stored in memory should only be set again if prevailing road conditions and legal speed limits permit. Possible acceleration or deceleration differences arising from re ...