Storing and maintaining the current speed
You can store the current speed if you are driving faster than 20 mph (30 km/h).
•► Accelerate the vehicle to the desired speed.
•► Briefly press the cruise control lever up 1 or down 2.
•► Remove your foot from the accelerator pedal.
Cruise control is activated. The vehicle automatically maintains the speed.
Cruise control may be unable to maintain the stored speed on uphill gradients. The stored speed is resumed when the gradient evens out. Cruise control maintains the stored speed on downhill gradients by automatically applying the brakes.
See also:
Cleaning the windows
WARNING
Before cleaning the windshield or wiper
blades, switch off the windshield wipers and
remove the SmartKey from the ignition lock.
On vehicles with KEYLESS-GO, press the
Start/Stop but ...
Setting the front-compartment
temperature using the front control
panel
Turn the SmartKey to position 2 in the
ignition lock.
To increase/reduce: press the
rocker switch up or down.
Only change the temperature setting in
small increments. Start at 72 °F (22 °C ...
Important safety notes
WARNING
When operating the climate control, the air
that enters the passenger compartment
through the air vents can be very hot or very
cold (depending on the set temperature). This
could ca ...