Changing gea
The automatic transmission shifts to the individual gears automatically when it is in transmission position D. This automatic gearshifting behavior is determined by:
- a shift range restriction, if selected
- the selected drive program
E/S or M (AMG vehicles)
- the position of the accelerator pedal
- the road speed
See also:
Instruction labels for tires and loads
WARNING
Do not overload the tires by exceeding the specified load limit as indicated
on the Tire and Loading Information placard on the driver's door B-pillar. Overloading
the tires can ...
Important safety notes
WARNING
When operating the climate control, the air that enters the passenger compartment
through the air vents can be very hot or very cold (depending on the set temperature).
This could ca ...
Tail lamp
Switch off the lights.
Open the trunk.
Open the side trim panel.
Remove the tail lamp connector
Simultaneously press retaining lugs
1 in the direction of the arrow and slightly pull out t ...