Deactivating/activating the ECO start/ stop function
Example: ECO button
If indicator lamp 2 is off, the ECO start/ stop function has been deactivated manually or as the result of a malfunction.
The engine will then not be switched off automatically when the vehicle stops.
Every time you start the engine, the ECO start/stop function is switched on and the automatic transmission shifts to automatic drive program C.
Deactivating
•► In drive program C, press button 1.
or
•► Switch to drive program S, S+ or
M.
Indicator lamp 2 on button 1 and the symbol in the multifunction display go out.
The Stop/Start active or Stop/Start inactive message disappears in the AMG menu in the multifunction display.
Activating
•► Press button 1.
Indicator lamp 2 lights up. If drive program S, S+ or M is selected, the automatic transmission switches to drive program C.
If all conditions for automatic engine switch-off are fulfilled, the symbol is shown in green in the multifunction display. In addition, the Stop/Start active display message is shown in the AMG menu in the multifunction display.
If not all conditions for automatic engine switch-off are fulfilled, the Stop/Start inactive display message and the symbol are shown in yellow in the AMG menu in the multifunction display. If this is the case, the ECO start/ stop function is not available.
See also:
Making adjustments in 5 mph (Canada:10 km/h) increments
► Briefly press the cruise control lever
beyond the pressure point, up 1 for a
higher speed or down 2 for a lower speed.
The last speed stored is increased or
reduced. ...
Restarting the tire pressure loss warning system
Restart the tire pressure loss warning system if you have:
changed the tire pressure
changed the wheels or tires
mount new wheels or tires
Before restarting, consult the Tire and Loading Inf ...
Using the TIREFIT kit
You can use the TIREFIT kit to seal small
punctures, particularly those in the tire tread.
You can use TIREFIT at outside temperatures
down to -4 °F (-20
°C).
WARNING
TIREFIT is a limited ...