Important safety notes
WARNING
Severe conditions (e.g. strong air pollution)
may require replacement of the filter before
its scheduled replacement interval. A clogged
filter will reduce the air volume to the interior
and the windows could fog up, impairing
visibility and endangering you and others.
Have a blocked filter replaced at a Mercedes- Benz Center as soon as possible.
WARNING
Follow the recommended settings for heating
and cooling given on the following pages.
Otherwise, the windows could fog up, impairing visibility and endangering you and others.
The automatic climate control adjusts the temperature and the humidity of the vehicle interior and filters undesired substances from the air.
The automatic climate control is only operational when the engine is running.15 Optimum operation is only achieved if you drive with the side windows and sliding sunroof/panorama roof with power tilt/ sliding panel closed.
Ventilate the vehicle for a brief period during warm weather, e.g. using the convenience opening feature (Y page 91).
This will speed up the cooling process and the desired vehicle interior temperature will be reached more quickly.
The integrated filter can filter out most particles of dust and completely filters out pollen. A clogged filter reduces the amount of air supplied to the vehicle interior. For this reason, you should always observe the interval for replacing the filter, which is specified in the Service Booklet. As it depends on environmental conditions, e.g.
heavy air pollution, the interval may be shorter than stated in the Service Booklet.
It is possible that the residual heat function may be activated automatically an hour after the SmartKey is removed. The vehicle is then ventilated for 30 minutes to dry the air-conditioning system.
See also:
Adjusting the lumbar support
You can adjust the contour of the front seats
so as to provide optimum support for your
back.
Move adjustment lever 1 in the
direction
of the arrow until the desired backrest
contour is ...
Removing/installing the cargo
compartment cover (without integrated
cargo net)
– To remove: make sure that cargo
compartment cover 1 is rolled up.
– Press in end cap 3 of cargo compartment
cover 1 on the right or left side in the
direction of the arrow and press cargo ...
Important safety notes
WARNING
For safety reasons, switch off the windshield
wipers and remove the key from the ignition
lock before changing the wiper blades
(vehicles with KEYLESS-GO: make sure that
the o ...
