Parking lamps/standing lamps (halogen headlamps)

•► Switch off the lights.

•► Switch off the lights.

•► Open the hood.

•► Turn housing cover 1 counter-clockwise and pull it out.

•► Pull out bulb holder 2.

•► Take the bulb out of bulb holder 2.

http://strategic-human-resource.com/

•► Insert the new bulb into bulb holder 2.

•► Insert bulb holder 2.

•► Align housing cover 1 and turn it clockwise until it engages.

    See also:

    Cup holders
    Important safety notes WARNING   In order to help prevent spilling liquids on vehicle occupants and/or vehicle equipment, only use containers that fit into the cup holder. Use lids on o ...

    Setting and storing the parking position
    You can position the front-passenger side exterior mirror in such a way that you can see the rear wheel on that side as soon as you engage reverse gear. You can store this position. Make s ...

    Step-by-step instructions
    The following steps have been developed as required of all manufacturers under Title 49, Code of U.S. Federal Regulations, Part 575 pursuant to the "National Traffic and Motor Vehicle Safety ...