High-beam headlamps (halogen headlamps)/cornering lamps (Bi-Xenon headlamps)

•► Switch off the lights.

•► Switch off the lights.

•► Open the hood.

•► Turn housing cover 1 counter-clockwise and pull it out.

•► Turn bulb holder 2 counter-clockwise and pull it out.

•► Take the bulb out of bulb holder 2;.

•► Insert the new bulb into bulb holder 2.

•► Insert bulb holder 2 into the lamp and turn it clockwise.

•► Align housing cover 1 and turn it clockwise until it engages.

    See also:

    Displays and controls
    Fuel gauge Coolant temperature Speedometer Segments Multifunction display Tachometer Outside temperature Outside temperature Additional speedometer Transmission position and dri ...

    Problems with the seat heating
    The seat heating has switched off prematurely or cannot be switched on. The vehicle's electrical system voltage is too low because too many electrical consumers are switched on. X Switch off ...

    Search & Send
    "Search & Send" is a destination entry service. You can find further information on "Search & Send" in the separate COMAND operating instructions. ...