Low-beam headlamps
•► To switch on the low-beam headlamps:
turn the SmartKey in the ignition lock to position 2 or start the engine.
•► Turn the light switch to 
.
The indicator lamp in the instrument
cluster lights up.
See also:
Problems with the SmartKey
Problem
Possible causes/consequences and
Solutions
You cannot lock or unlock the vehicle using
the SmartKey.
The SmartKey battery is discharged or nearly discharged.
...
Emergency Tensioning Devices, belt force limiters
The front seat belts and the outer seat belts
in the rear are equipped with ETDs and seat
belt force limiters.
The ETDs tighten the seat belts in an accident,
pulling them close against the bod ...
Information about driving abroad
Converting to symmetrical low beam
when driving abroad: switch the headlamps
to symmetrical low beam in countries in
which traffic drives on the opposite side of the
road to the country where ...