Calling up a stored parking position setting

•► Turn the SmartKey to position 2 in the ignition lock.
•► Adjust the exterior mirror on the frontpassenger side with the corresponding button
•► Engage reverse gear.

The exterior mirror on the front-passenger side moves to the stored parking position.

The exterior mirror on the front-passenger side moves back to its original position:

 - as soon as you exceed a speed of 6 mph (10 km/h)
 - about ten seconds after you have disengaged reverse gear
 - if you press button 1 for the exterior mirror on the driver's side

    See also:

    Vehicle identification number (VIN)
    The vehicle identification number (VIN) can be found in the following locations: • on the vehicle identification plate • at the lower edge of the windshield In addition to being stamped on the veh ...

    Storing settings
    With the memory function, you can store up to three different settings, e.g. for three different people. The following settings are stored as a single memory preset: position of the seat, backr ...

    Correct driver's seat position
    Observe the safety guidelines on seat adjustment •► Check whether you have adjusted seat = properly. Electrical seat adjustment (Y page 100) When adjusting the seat, make sure:   ...