Position of the steering wheel for driving

The steering wheel is moved to the last selected position when:

 - the driver's door is closed.

 - you insert the SmartKey into the ignition lock.
or
 - you press the Start/Stop button once on vehicles with KEYLESS-GO.

When you close the driver's door with the ignition switched on, the steering wheel is also automatically moved to the previously set position.

The last position of the steering wheel is stored after each manual setting or when you store the setting with the memory function

    See also:

    Step-by-step instructions
    The following steps have been developed as required of all manufacturers under Title 49, Code of U.S. Federal Regulations, Part 575 pursuant to the "National Traffic and Motor Vehicle Saf ...

    Range of the sensors
    General notes The sensors must be free of dirt, ice and slush; otherwise they may not function correctly. Clean the sensors regularly, taking care not to scratch or damage them Side view, Se ...

    Engine
    Display messages Possible causes/consequences and •► Solutions Check Coolant Level See Operator's Manual The coolant level is too low. •► Add coolant, observing the ...