Important safety notes

The folding bench seat in the cargo compartment is only approved for people with a height no greater than 4.6 ft(1.40 m) and max. 110 lb(50 kg) body weight.

The maximum permissible weight available for passengers may be reduced by extensive optional extras and the vehicle load. Observe the maximum gross vehicle weight and the gross axle weight rating, which can be found on the vehicle identification plate.

The combined cargo cover and net must be installed if you are using the folding bench seat

WARNING
The rear seat backrests must be locked in the upright position if you are using the folding bench seat in the cargo compartment.

Do not pull away unless the head restraint in the folding bench seat is installed correctly.

Make sure that the center of the head restraint supports the seat occupant's head at about eye level. This can reduce the risk of injury to a child in the event of an accident. Ensure that the seat belt is routed correctly across the body and the seat belt buckle is engaged.

Never leave children unsupervised in the vehicle. This applies even if they are secured in a child restraint system.

Secure children as recommended; see the "Children in the vehicle" section.

WARNING
Only replace damaged covers with genuine covers.

Make sure that items of luggage and other objects in the cargo compartment are well secured.

Otherwise, the load could cause injury in the event of sharp braking, a sudden change in direction or an accident.

    See also:

    Resetting values
    You can reset the values of the following functions:  - Trip odometer  - Trip computer "From start"  - Trip computer "From reset" •► Press the butt ...

    Important safety notes
    DISTRONIC regulates the speed and automatically helps you maintain the distance to the vehicle detected in front. It brakes automatically in order to avoid exceeding the set speed. On long and ...

    Parking lamps/standing lamps (halogen headlamps)
    Parking lamps/standing lamps (halogen headlamps) Switch off the lights. Open the hood. Turn housing cover 1 counter-clockwise and pull it out. Pull out bulb holder 2. Take the bulb out o ...