Cleaning the display
Before cleaning the display, make sure that
it is switched off and has cooled down.
Clean the display surface using a
commercially-available microfiber cloth
and TFT/LCD display cleaner.
Dry the display surface using a dry
microfiber cloth.
For cleaning, do not use any of
the
following:
• alcohol-based thinner or gasoline
• abrasive cleaning agents
• commercially-available household
cleaning agents
These may damage the display surface. Do not put pressure on the display surface when cleaning. This could lead to irreparable damage to the display.
See also:
Turn signal lamps/side marker lamps
Switch off the lights.
Open the hood.
Remove the headlamp cover ().
Left-hand headlamp: detach the washer fluid reservoir ().
Turn bulb holder 1 or 2 counterclockwise and pull it out.
W ...
Load bearing index
The load bearing index (also load index) is a
code that contains the maximum load bearing
capacity of a tire. ...
Vehicle tool kit
The vehicle tool kit can be found in the
stowage well under the trunk floor/cargo
compartment floor. Depending on the vehicle
equipment, the vehicle tool kit is on the lefthand
side or the rig ...
