Cleaning the wiper blades
WARNING
Before cleaning the windshield or wiper
blades, switch off the windshield wipers and
remove the SmartKey from the ignition lock.
On vehicles with KEYLESS-GO, press the
Start/Stop button repeatedly until all
indicator lamps in the instrument cluster have
gone out. The windshield wipers could
otherwise move and injure you.
Only fold the windshield wipers
away from
the windshield when vertical. Otherwise,
you will damage the hood.
Do not pull the wiper blade.
Otherwise,
the wiper blade could be damaged.
Do not clean wiper blades too
often and
do not rub them too hard. Otherwise, the
graphite coating could be damaged. This
could cause wiper noise.
Fold the wiper arms away from the
windshield.
Carefully clean the wiper blades with a
damp cloth.
Fold the windshield wipers back again
before switching on the ignition.
Hold the wiper arm securely when
folding
back. The windshield could be damaged if
the wiper arm smacks against it suddenly.
See also:
DISTRONIC PLUS displays in the
speedometer
When you switch on DISTRONIC PLUS,
triangle 2 shows the stored speed.
For design reasons, the speed displayed
in the speedometer may differ slightly from
the speed set for DISTRONIC PLUS.
I ...
Important safety notes
You will find an illustration of the instrument
cluster in the "At a glance".
WARNING
A driver's attention to the road and traffic
conditions must always be his/her primary
focus wh ...
Using the rear center seat belt
If the left-hand rear seat backrest is folded
down and back up again, the rear center seat
belt may lock. The seat belt can then not be
pulled out.
To release the rear center seat belt:pull
o ...
